LED FLICKER ELIMINATOR KIT BALLY AUX LAMP BOARD AS-2518-43

LED flicker eliminator adapter kit for classic Bally Auxiliary Lamp Driver board AS-2518-43. Converting early Bally or Stern pinball machines to LEDs (light emitting diodes) is easy and effective for general illumination lamps, but because of their very low current draw, LED switched or controlled feature lamps flash on and off every 8 milliseconds and create an annoying flicker. This adapter board economically corrects the problem and works with all types of LED lamps connected to the original factory AS-2518-43 Bally Auxiliary Lamp Driver board. This unit ONLY adapts the auxiliary lamp driver board, not the main lamp driver board. Both this adapter and the Classic Bally/Stern LED adapter set, part number MB-07-011 are needed to convert a full game. LED adapters are available separately for Auxiliary Lamp Boards AS-2518-52 under related items below. INSTALLATION INSTRUCTIONS: 1. Simply unplug the cable from the AS-2518-43 aux lamp board, install this small 'piggyback' board in its place and re-connect the cables to the new boards. Reference: MA-09-011-043 Weight: 0.64 lb